FJ Cruiser parts

 

FJ Cruiser Roll-top Console Cover Divider Insert


A new accessory has been developed for the Roll-top Console Cover. The new drop-in divider tray provides a caddy function to keep your small stuff (iPod, toll road coins, iPhone, etc) from getting lost in the bottom of the Black Hole of the center console. The tray readily slips in and out of your existing Roll-top Console Cover using one hand. Sidewalls on the tray keep your stuff from falling out. When inserted the tray rests on the built-in ledge at the bottom of the Roll-top Cover. Presently the divider tray design interferes with the lock on the locking versions of the Roll-top Console Cover. Please call the factory for use with a locking Roll-top Console Cover.
The photo below shows the three compartments and the 1.38" high sidewalls. The compartments are 2.6x6.6" and 3.2x3.9" The material is the same black textured ABS as the original Roll-top Cover.



 

The photo below shows you how the tray is removed by tilting the front up at 30 degrees and withdrawing forward and upwards. A similar reverse motion is used to install the tray.

 

 

 

The photo below shows the installed tray. The roll-top cover still works in the same manner to protect and cover up the contents of the tray.

 

 

 

Standard Divider Tray price - $14.95

 

Combo Order = Cover plus installed Standard Divider Tray

 

 

Shipping and Handling for the Divider Tray alone is $18 which covers shipment by UPS ground within the contintental U.S.

There is no extra shipping charge for the Divider Tray if ordered with the Combo Option.

Expedited and International shipping is available for an additional fee depending on the destination.

Credit Card payments accepted.

 

 

Contact Dick Ketchpel for sales and payment information

805-886-6191

dick@ketchengr.com

 

Back